FISHINGFIX
← The Journal
· The FishingFix Team

How to Read a Tide Table for Fishing, and What a Tide Estimate Can't Tell You

On the coast, the tide sets the timetable. It decides where the fish are, whether a flat is fishable or dry, and whether a sandbar you walked out on is still connected to the beach. Reading a tide table is a basic skill for any saltwater angler. This guide explains what a table tells you, how the regular tidal cycle works, and what our Tide Predictor does with it, including the places where a simple estimate goes badly wrong.

What a tide table shows

An official tide table lists, for one named station, the predicted time and height of each high and low tide, day by day. In the US the source is NOAA Tides & Currents (tidesandcurrents.noaa.gov); in the UK it is the Admiralty's EasyTide service; most other coastal countries publish their own. Four things to read for each day:

  • The times of high and low water, in local time. Check whether the table already allows for daylight saving time.
  • The heights, measured from a reference level called chart datum. A low tide with a negative height falls below that level, which means more exposed flats and rocks than usual, and a faster flood back over them.
  • The range, the difference between a high and the next low. A big range means strong tidal currents; a small one means gentle movement.
  • The station. Tide times can differ by an hour or more between a harbor mouth and a creek a few miles inland. Use the station nearest to where you will fish, or apply the published offsets for a secondary station.

The rhythm behind it

On most coasts there are two highs and two lows a day. The full cycle from one high to the next takes about 12 hours and 25 minutes, which is why tide times move later by roughly 50 minutes each day. Low water falls about halfway between two highs, around 6 hours and 12 minutes after high.

That regular rhythm is what our Tide Predictor uses. You give it one known high tide from an official table and the time you want to check, and it projects forward with a fixed 12 h 25 min cycle. It labels the water High or Low within 90 minutes either side of the turn, Falling between high and low, and Rising between low and high.

A day worked through

Suppose the table for your station gives a high tide at 06:10. Entering that, the predictor puts the next low at 12:22 and the following high at 18:35. Here is how it describes the water through the day:

TimeStateNext lowNext high
06:10High12:2218:35
07:40High12:2218:35
08:30Falling12:2218:35
10:00Falling12:2218:35
11:00Low12:2218:35
12:22Low12:2218:35
14:00Rising00:4718:35
16:00Rising00:4718:35
17:30High00:4718:35
18:35High00:4707:00

For fishing, the useful part is the middle of each column: the hours of moving water. On many coasts fish feed most actively when the tide is running, because moving water carries bait to them, and the slack water around the very top and bottom of the tide is often the quietest time. In this example that points to the falling tide in mid-morning and the rising tide in the afternoon. Which stage is best depends on the place. A creek mouth can fish best on the last of the ebb as bait drains out of the marsh; a flat often fishes best on the first of the flood as fish push up into water that was dry an hour earlier. The table gives you the clock; local knowledge tells you which hour on it matters.

The predictor will project up to two cycles from your high, 24 hours 50 minutes, so the high you enter this morning also gives you tomorrow morning's: the next high after 06:00 on the following day comes out at 2026-06-14 07:00. Ask it for a time further away and it refuses: “That is more than two tide cycles (24 h 50 min) after the known high. Read a fresh high tide from the official tide table and start again.” That is deliberate. Small errors in a fixed cycle add up, and an estimate a week ahead is not worth having when the official table is free.

Where a simple estimate goes wrong

The predictor shows this note with every result, quoted in full because every part of it matters:

This is a fixed-cycle estimate, not a tide table. Use the official predictions for your exact station: NOAA Tides & Currents (tidesandcurrents.noaa.gov) in the US, and in the UK Admiralty EasyTide, which the RNLI calls “the UK government’s tidal prediction service.” Even official tables cover the astronomical tide only. NOAA: “We cannot predict the effect that wind, rain, freshwater runoff, and other short-term meteorological events will have on the tides.” This model assumes two highs a day of equal size; NOAA notes that “Some areas, such as the Gulf of Mexico, have only one high and one low tide each day” and that the “U.S. West Coast tends to have mixed semidiurnal tides” (highs of different heights), and in those places this estimate can be badly wrong.

Put plainly:

  • Not every coast has two equal tides a day. Parts of the Gulf of Mexico have one high and one low a day. Much of the US West Coast has two highs of quite different heights. A fixed 12 h 25 min model can be hours out there.
  • Weather moves the water. Onshore wind and low pressure push water higher and hold it there longer; offshore wind and high pressure can hold it lower. Heavy rain raises rivers and estuaries. Not even the official table includes these effects.
  • Local shape matters. Bays, inlets and long estuaries delay and distort the tide; the turn can come late, and the flood can run for longer than the ebb.
  • Heights are not modeled. The predictor gives times and states, not heights. Whether a particular rock or bar covers depends on height, which only the official table, and your own eyes, can tell you.

So use the predictor to understand the rhythm, or to sketch out a session when you have a single high-tide time to hand. Use the official tide table for anything where being wrong matters.

Safety: the tide does not wait

Never use this estimate for safety or navigation. The RNLI: “Before you head out, make sure it's safe. Check the tide tables.” Getting cut off by the tide “contributes to a significant number of RNLI rescues every year.” On a causeway, a sandbar or rocks, plan to be back off well before the water turns, never after, and wear a life jacket on rocks and on a boat (the US Coast Guard: “A wearable PFD can save your life, but only when you wear it.”).

  • Before you walk out onto a sandbar, flat, causeway or rocks, know when the water turns and plan to be back well before it does. Note where you came across; the route back may cover first.
  • Wear a life jacket on rocks and jetties and on any boat or kayak. Rocks near the water are slippery with weed, and a fall into cold, moving water is serious.
  • Watch for waves. Rising water and waves arrive together, and a single bigger wave can sweep a rock ledge that looked dry.
  • Do not fish alone in risky spots, and tell someone where you are going and when you will be back.
  • If you are cut off, do not try to wade or swim back through deepening water. In the US call 911, and in the UK call 999 or 112 and ask for the Coastguard.

The companion guide, the best tide for fishing and how not to get cut off, plans a session on a flat around the tide.

Get new guides by emailOccasional emails. No spam. Unsubscribe anytime.