FISHINGFIX
← The Journal
· The FishingFix Team

How to Estimate a Fish's Weight from Length and Girth

Most fish worth weighing are also worth releasing, and the less time they spend out of the water the better. A tape measure is quicker than a scale, kinder than hanging a fish from a hook, and with two measurements you can estimate the weight closely enough for a logbook. This guide explains the formula our Fish Weight Calculator uses, works it through for six species, and is honest about how far to trust it.

The formula

When you give the calculator a girth, it uses the long-standing angler's girth formula:

weight in pounds = girth² × length ÷ 800

with both measurements in inches. Length is total length, from the tip of the closed mouth to the tip of the tail. Girth is the distance around the fish at its fattest point, usually just in front of the dorsal fin. The formula treats the fish as a rough cylinder whose volume grows with the square of its girth, which is why girth matters so much more than length.

Worked by hand for a bass 20 inches long with a 15 inch girth: 15 × 15 = 225; 225 × 20 = 4,500; 4,500 ÷ 800 = 5.63 lb, or 2.55 kg. The calculator gives the same.

Worked examples

FishLengthGirthEstimateMetric
Largemouth bass18 in13 in3.8 lb1.72 kg
Largemouth bass20 in13 in4.22 lb1.92 kg
Largemouth bass20 in15 in5.63 lb2.55 kg
Largemouth bass22 in17 in7.95 lb3.6 kg
Rainbow trout20 in11 in3.03 lb1.37 kg
Rainbow trout24 in13 in5.07 lb2.3 kg
Walleye24 in13 in5.07 lb2.3 kg
Northern pike36 in15 in10.13 lb4.59 kg
Channel catfish28 in17 in10.12 lb4.59 kg
Salmon32 in18 in12.96 lb5.88 kg

The measurements are examples chosen to show the range, not records or averages for each species. Note the two 20 inch bass: with a 13 inch girth the estimate is 4.22 lb, with a 15 inch girth 5.63 lb. Same length, very different fish. A spring female full of eggs and a thin fish just after spawning can be the same length and very different in girth, and only the girth measurement sees it. Also note that the formula does not care about species once you give it a girth: a 24 inch, 13 inch girth trout and walleye come out the same, at 5.07 lb.

Small errors, big differences

Because girth is squared, an inch of error in the girth moves the answer a lot. For the same 20 inch bass:

  • girth 14 inches: 4.9 lb
  • girth 15 inches: 5.63 lb
  • girth 16 inches: 6.4 lb

That is a spread of well over a pound from a one-inch slip either side. So measure girth carefully: a soft cloth tape, pulled snug but not tight, around the thickest part of the body. A fish that has just eaten, or one with a full belly of eggs, will measure fatter than its usual shape.

Without a girth

If you leave the girth blank, the calculator falls back to a length-only estimate with a shape factor for the species, length cubed divided by a factor that is larger for long, slim fish. That is rougher still, because it assumes every fish of a given length has the same build. The contrast with a girth reading can be large. A 36 inch pike estimated from length alone comes out at 13.33 lb; the same pike with a measured 15 inch girth comes out at 10.13 lb. A 24 inch walleye from length alone is 5.12 lb, close to the 5.07 lb that a 13 inch girth gives. Wherever you can, take the girth.

Where the length-only divisors come from matters too. For walleye (2,700), pike (3,500) and sunfish (1,200), they are the length-only formulas Wisconsin's Department of Natural Resources publishes. For bass the calculator uses length cubed divided by 1,600, the rule of thumb anglers have long repeated, which puts a 20 inch bass at 5 lb. For trout, salmon and catfish we found no published length-only rule, so the calculator still gives a figure (a 24 inch trout comes out at 8.64 lb) but labels it a rough figure and asks for the girth. Treat it that way.

What the estimate cannot tell you

The calculator shows this note with every result:

An estimate from a rule-of-thumb formula, not a weight: fish of the same length vary, and only a scale is exact. If you plan to keep and eat fish, check the advice for that water first. The EPA: “States, territories and Tribes issue advisories to protect people from potentially contaminated fish and shellfish caught in local waters.”

  • It is an estimate, not a weight. Fish of the same length and girth vary with body shape, condition and season. For a record claim or a tournament weigh-in, only a certified scale counts, under that organization's rules.
  • The formula fits some shapes better than others. It was built for fish with a roughly round body. Very deep, flat fish such as large sunfish, or very long, thin fish, fit less well.
  • It does not set legal size. Size limits are in length (and sometimes girth or count), measured the way the regulation says. A weight estimate has nothing to do with whether a fish may be kept; see how to read size and bag limits.
  • It refuses impossible inputs. A girth larger than the length gets an error rather than a number: “A girth longer than the fish is not possible: measure the girth around the fattest part.”

Measuring a fish you plan to release

The point of estimating weight is to release the fish in good shape, so measure quickly:

  1. Have the tape or measuring board ready and wet before you land the fish.
  2. Wet your hands. Dry hands and towels strip the protective slime from the fish's skin.
  3. Lay the fish on the wet board or on a wet surface; do not hang it by the jaw or gills.
  4. Take the length, then slip the soft tape around the fattest part for the girth. Say the numbers aloud or have a partner write them down.
  5. Get it back in the water. Aim for well under a minute out of the water, less in warm weather.

Unhook the fish before you measure it, with pliers or a hook remover, and keep your own fingers clear of the hooks while the fish is still lively. A treble hook that ends up in a finger, deep in skin or anywhere near an eye needs medical care rather than a riverside attempt to pull it out; cut the line and get it seen.

How to measure a fish and release it safely covers handling in more detail.

Keeping fish to eat

If you keep a fish, check the fish consumption advisory for that water before you eat it, as the calculator's note says. Advisories are often stricter for larger fish of a species, because they have had longer to build up contaminants, so a big fish you have just measured is exactly the one to check. See is it safe to eat the fish you catch?

Quick reference

Total length and girth in inches; girth squared, times length, divided by 800, gives pounds. Measure the girth carefully, keep the fish wet, and log the estimate as an estimate. The Fish Weight Calculator does the arithmetic and gives kilograms too.

Get new guides by emailOccasional emails. No spam. Unsubscribe anytime.